Search
Close this search box.
Search
Close this search box.
Home / Projects / Composite slab for a sea water desalination plant in Ténès, Argelia

Composite slab for a sea water desalination plant in Ténès, Argelia

Building type: Depuradora/Planta desaladora

Year of construction: 2014

Amount: 2660 m2

Work: Sea water desalination Plant with inverse osmosis

Finish: Acero Prelacado HDX55

Related systems:

Related products:

The INCO 70.4 composite slab has been used in the slabs of the desalination plant in Ténès, Argelia with a special coating HDX-55 microns.

The main objectif of this project is to provide safer water to Ténès region, in Argelia to meet the needs of this part of the country. The plant expects to supply around a million people. The plant’s capacity is 200.000 m3/day in 10 lines.

INCOPERFIL has supplied 2660 m2 of the composite slab system INCO 70.4 to the construction of the sea water desalination plant. This project respects the inverse osmosis, and it has been executed by Befesa Agua, accompanied by the govern society; Argelian Energy Company (AEC) with 80% of banks financy and 20% of Befesa and AEC.

Due of the proximity of the Mediterraean Sea, the composite slab has suited a demanding specifications and standards. The steel protection (galvanazing) was 275 gr/ both faces and polyester protection with HDX-55 microns.

Start designing your project

We put all our knowledge, tools and experience
at your project’s disposal so that you
can materialize it according to your expectations.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Características de la edificación
Cargas de solicitación de la fachada industrial
(1) Para los tramos del perfil de fachada con 2, 3, 4 o más apoyos, indique las mayores distancias entre apoyos que se presentan en su proyecto.
Tipo de ambiente
Documentación adjunta
Comentarios adicionales
Datos de contacto
Datos de proyecto
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length <5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Indicate the obstructed area under the canopy in m² in relation to the total area of ​​the front or side facade (transverse or longitudinal) to determine the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.