Search
Close this search box.
Search
Close this search box.
Home / Projects / Curved roof for a factory of plastic trays with a precast concrete structure in Reocín (Cantabria) -Spain

Curved roof for a factory of plastic trays with a precast concrete structure in Reocín (Cantabria) -Spain

Building type: Almacen/Nave industrial

Country: España

Province: Cantabria

Year of construction: 2020

Amount: 4700 m2

Work: Plastic tray manufacturing plant

Finish: Acero Prelacado Granite 25

Related systems:

Related products:

The curved self-supporting sandwich roof solution has been chosen to cover the 4700 m² of this new logistics platform in Reocín - Cantabria.

The plastic tray manufacturing plant in Reocín has had a precast concrete structure solution with a self-supporting sandwich roof with large spans. The INCO 70.4 Curved Self-Supporting profile has been installed as a support profile for the sandwich system followed by the omega profile, insulation and finally the upper INCO 30.5 Curved sealing profile.

This solution provides an excellent aesthetic finish, as well as a reduction in the weight of the structure, since the self-supporting curved roof is installed on the precast Y-type beams at a free span, in this case, 8 meters without the need for intermediate purlins.

Start designing your project

We put all our knowledge, tools and experience
at your project’s disposal so that you
can materialize it according to your expectations.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Características de la edificación
Cargas de solicitación de la fachada industrial
(1) Para los tramos del perfil de fachada con 2, 3, 4 o más apoyos, indique las mayores distancias entre apoyos que se presentan en su proyecto.
Tipo de ambiente
Documentación adjunta
Comentarios adicionales
Datos de contacto
Datos de proyecto
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length <5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Indicate the obstructed area under the canopy in m² in relation to the total area of ​​the front or side facade (transverse or longitudinal) to determine the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.