Search
Close this search box.
Search
Close this search box.
Home / Projects / Curved roofing system for showroom in Meknes (Morocco)

Curved roofing system for showroom in Meknes (Morocco)

Building type: Edificio de oficinas

Country: Morocco

Year of construction: 2015

Amount: 3500 m2

Work: Curved roofing for a showroom

Finish: Acero Prelacado Granite 25

Related systems:

Related products:

System composed by curved cover substructure system, isolation and finally covered curved solution in two directions.

The work of curved metal cover is supplied in Meknes, city in northern Morocco at the foot of the mountains of the Middle Atlas. The curved system formed by a set of elements, ensures good finish cover also the sealing of the same.
The system is composed of an (existing) internal smooth sheet metal skin, followed by an auxiliary perfileria omega type 40 mm, insulation of fiberglass and finally by INCO 30.5 curved profile . This project has been providing a specific solution as the cover is curved in two directions, and this will lead to an increased level of complexity.

Start designing your project

We put all our knowledge, tools and experience
at your project’s disposal so that you
can materialize it according to your expectations.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Características de la edificación
Cargas de solicitación de la fachada industrial
(1) Para los tramos del perfil de fachada con 2, 3, 4 o más apoyos, indique las mayores distancias entre apoyos que se presentan en su proyecto.
Tipo de ambiente
Documentación adjunta
Comentarios adicionales
Datos de contacto
Datos de proyecto
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length <5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Indicate the obstructed area under the canopy in m² in relation to the total area of ​​the front or side facade (transverse or longitudinal) to determine the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.