Search
Close this search box.
Search
Close this search box.
Home / Projects / Parkings covered with solar panels in Montpellier- France

Parkings covered with solar panels in Montpellier- France

Building type: Aparcamiento

Year of construction: 2013

Amount: 5000 m2

Work: Parkings covered with solar panels

Finish: Acero Galvanizado

Related systems:

Related products:

The project executed in Montpellier has incorporated the product INCO 30.4 as a false ceiling, drainage system and protection for photovoltaic panels. At the same time, those photovoltaic panels act as a sunshade, optimizing both the surface and the application.

The project executed in Montpellier has incorporated the product INCO 30.4 as a false ceiling, drainage system and protection for photovoltaic panels. At the same time, those photovoltaic panels act as a sunshade, optimizing both the surface and the application
The project has had an impact in the French media because it saves around 264 tonnes of CO2 per year to the city of Montpellier. The estimated energy production is about 1,291 million kWh / year for 20 years, equivalent to the electricity consumption of 450 households (excluding heating).

View press relaese

Start designing your project

We put all our knowledge, tools and experience
at your project’s disposal so that you
can materialize it according to your expectations.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Características de la edificación
Cargas de solicitación de la fachada industrial
(1) Para los tramos del perfil de fachada con 2, 3, 4 o más apoyos, indique las mayores distancias entre apoyos que se presentan en su proyecto.
Tipo de ambiente
Documentación adjunta
Comentarios adicionales
Datos de contacto
Datos de proyecto
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length <5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Indicate the obstructed area under the canopy in m² in relation to the total area of ​​the front or side facade (transverse or longitudinal) to determine the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.