Search
Close this search box.
Search
Close this search box.
Home / Projects / Self-supporting Curved Roof for the Línea de la Concepción (Cádiz)- Spain

Self-supporting Curved Roof for the Línea de la Concepción (Cádiz)- Spain

Building type: Zona portuaria

Country: España

Province: Huelva

Year of construction: 2022

Amount: 500 m2

Work: Border crossings

Finish: Acero Prelacado Granite 25

Related systems:

Related products:

The INCO 155.3 Curved Self-supporting profile has been used on the access control roofs of the border crossing between Spain and Gibraltar.

The Government has invested 5.6 million euros in the reorganization of Customs between La Línea de la Concepción (Huelva) and Gibraltar. Different modules have been built to expedite the entry and exit of people and vehicles. At the border access control points, a series of canopies have been set up with the self-supporting curved roof system.

The INCO 155.3 Curved Self-supporting profile allows reaching spans of up to 23 meters without an intermediate structure, mainly due to its 155 mm edge and its 3-wave geometry. In this case, due to the particularly reduced deflection of the project, the 1.20 mm thick INCO 155.3 Curved Self-supporting profile has been used to guarantee load behavior for a span between supports of 10.80 m.

Start designing your project

We put all our knowledge, tools and experience
at your project’s disposal so that you
can materialize it according to your expectations.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Características de la edificación
Cargas de solicitación de la fachada industrial
(1) Para los tramos del perfil de fachada con 2, 3, 4 o más apoyos, indique las mayores distancias entre apoyos que se presentan en su proyecto.
Tipo de ambiente
Documentación adjunta
Comentarios adicionales
Datos de contacto
Datos de proyecto
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length <5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Indicate the obstructed area under the canopy in m² in relation to the total area of ​​the front or side facade (transverse or longitudinal) to determine the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.